Can a Boundary Fence Be Used as a Pool Fence in Queensland?

Yes, a Boundary Fence Can Form Part of the Pool Barrier

A boundary fence can be used as a pool fence in Queensland, provided it meets the requirements of the Queensland pool safety standard. Dividing fences used as pool barriers in Queensland are common, so a second fence inside the property is not automatically required simply because the pool sits near a boundary.

The important part is compliance. The section of boundary fence forming part of the pool barrier must meet the same safety requirements as the rest of the barrier, including requirements around height, gaps, climbability and access. If the existing fence does not comply, it may need to be altered, replaced or supplemented with a separate compliant barrier inside the property.

What the Boundary Fence Needs to Meet

A boundary fence can only form part of the pool barrier if it meets the same safety requirements as the rest of the fence line. In Queensland, that means checking the fence height, gaps, climbability and the areas immediately around the barrier. The Queensland pool fence requirements set out the relevant measurements and non-climbable zone rules for boundary fences.

  • Fence height: the barrier must generally be at least 1200 mm high above finished ground level.
  • Non-climbable zone: a continuous 900 mm non-climbable zone needs to be maintained so children cannot use nearby objects or structures as footholds.
  • Gaps below the fence: a gap greater than 100 mm must not develop underneath the barrier.
  • Nearby climbable objects: furniture, landscaping, structures and other objects can affect whether the required non-climbable zone is maintained.
  • Boundary fences below 1800 mm: the outside non-climbable zone still needs to meet the required standard.
  • Boundary fences at least 1800 mm high: where the outside zone cannot be controlled, the required non-climbable area can instead be maintained on the pool side when the relevant conditions are met.

If the existing boundary fence cannot meet these requirements, modifications or a separate compliant pool barrier may be needed.

Can a Boundary Fence Be Used as a Pool Fence in Queensland - Boundary pool fence

What If the Existing Boundary Fence Does Not Comply?

An existing boundary fence should not automatically be treated as a compliant pool barrier just because it already separates the two properties. If it falls short on height, climbability, gaps or other pool safety requirements, the fence may need to be modified or replaced before it can form part of the pool enclosure. In some cases, installing a separate barrier inside the property may be the simpler option.

Where the boundary fence is shared with a neighbour, any proposed alteration also needs to follow the rules that apply to dividing fences used as pool barriers. Queensland guidance notes that the existing style should generally be maintained using similar materials and colours unless doing so would prevent compliance. The rules for modifying a dividing fence used as a pool barrier also cover when neighbour agreement, notice or QCAT involvement may be required.

Can a Boundary Fence Be Used as a Pool Fence in Queensland - Pool fence

Keeping a Boundary Pool Fence Compliant

A boundary fence can meet the pool safety standard when it is first installed and still become non-compliant later if the area around it changes. Garden beds, stored items, outdoor furniture, new structures and growing vegetation can all create footholds or reduce the effective height of the barrier. Damage to panels, posts or adjoining sections can also affect whether the fence continues to function as a compliant pool barrier.

This makes ongoing checks important, particularly after landscaping or other work near the boundary. Our article on landscaping changes that cause pool fence non-compliance covers some of the common changes that can affect an existing barrier. Keeping climbable objects away from the fence, maintaining the required gaps and dealing with damaged sections early can help prevent an otherwise compliant boundary pool fence from developing problems over time.

Can a Boundary Fence Be Used as a Pool Fence in Queensland - Boundary fencing around pool with garden bed

Talk to Northside Fencing About Pool Fencing

If your existing boundary fence forms part of a pool barrier, or you are planning new fencing around a pool, Northside Fencing can help with suitable pool fencing options for the property. This can include replacing non-compliant sections, installing a separate barrier or integrating the pool fence with the surrounding boundary fencing.

Northside Fencing provides pool fencing across Brisbane, the Sunshine Coast and the Moreton Bay region. Contact the team on (07) 3491 4100 or send an enquiry online to discuss the fencing required for your property.

Can a Boundary Fence Be Used as a Pool Fence in Queensland - Glass pool fencing

FAQ

Yes. A boundary or dividing fence can form part of a pool barrier in Queensland, provided it complies with the pool safety standard. The Queensland rules for dividing fences used as pool barriers specifically allow shared boundary fencing to be used this way.

A boundary fence used as a pool barrier must generally be at least 1200 mm high and meet the required non-climbable zone rules. Higher boundary fences can be treated differently depending on where the non-climbable zone is maintained.

No. Height alone does not make a fence compliant. The barrier also needs to meet requirements covering climbability, gaps and nearby objects that could provide a foothold or handhold.

The fence may need to be modified or replaced, or a separate compliant barrier may need to be installed inside the property. The best option will depend on the existing fence, its condition and which part of the pool safety standard it does not meet.

Queensland rules require specific notice procedures when a dividing fence is being altered or replaced for use as a pool barrier. For non-urgent work without the neighbour’s agreement, a Form 39 generally needs to be provided at least 14 days before work begins. The notice requirements for pool barrier fencing work set out the process in more detail.

Queensland uses a user-pays approach for pool-related fencing work. If the work is needed only to make one owner’s pool barrier compliant, that pool owner generally pays the full cost. If pools on both sides require the same work for compliance, the cost is generally shared equally.